- 您现在的位置：买卖IC网 > Sheet目录253 > SRV05-4.TCT (Semtech)TVS DIODE 5V 4CH BI SOT23-6
SRV05-4
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of Four
High-Speed Data Lines
The SRV05-4 TVS is designed to protect four data lines
from transient over-voltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V F ) the
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 1, 3, 4 and 6. The
negative reference (REF1) is connected at pin 2. This
pin should be connected directly to a ground plane on
the board for best results. The path length is kept as
short as possible to minimize parasitic inductance.
The positive reference (REF2) is connected at pin 5.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
pin 5 directly to the positive supply rail (V CC ). In this
configuration the data lines are referenced to the
supply voltage. The internal TVS diode prevents
over-voltage on the supply rail.
2. The SRV05-4 can be isolated from the power
supply by adding a series resistor between pin 5
and V CC . A value of 100k ? is recommended. The
internal TVS and steering diodes remain biased,
providing the advantage of lower capacitance.
3. In applications where no positive supply reference
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pin 5 is not connected. The steering
diodes will begin to conduct when the voltage on
the protected line exceeds the working voltage of
the TVS (plus one diode drop).
ESD Protection With RailClamps ?
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
? 2008 Semtech Corp.
5
www.semtech.com
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
SRV05-4A.TCT
TVS DIODE 5V 4CH BI SOT23-6
SRV05-4HTG
TVS DIODE ARRAY 4CH 5V SOT23-6
SRVO-5055B
SNAP RIVETS V/O .098-.138"TH
SS-01GLPT
SWITCH LEVER SPDT .1A .110QC
SS-1-4
SWITCH PIN PLUNGER 0.1A
SS-5GL21D-12
SWITCH BASIC SUBMINI ROLLR LEVER
SS-5GL4025
SWITCH 5A HINGE SOLDER
SSCEA31C
SWITCH LIMIT WHEEL PLUNG SPDT
相关代理商/技术参数
SRV05-4.TCT
制造商:Semtech Corporation 功能描述:TVS Diode
SRV05-4_07
制造商:PROTEC 制造商全称:Protek Devices 功能描述:STEERING DIODE/ TVS ARRAY COMBO
SRV05-4_08
制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:RailClamp? Low Capacitance TVS Diode Array
SRV05-4_11
制造商:PROTEC 制造商全称:Protek Devices 功能描述:ultra low capacitance steering diode/tvs array
SRV05-4_12
制造商:PROTEC 制造商全称:Protek Devices 功能描述:ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY
SRV05-4A.TCT
功能描述:TVS DIODE 5V 4CH BI SOT23-6 RoHS:是 类别:过电压，电流，温度装置 >> TVS - 二极管 系列:RailClamp® 标准包装:7,500 系列:TransZorb® 电压 - 反向隔离（标准值）:30.8V 电压 - 击穿:34.2V 功率（瓦特）:400W 电极标记:单向 安装类型:表面贴装 封装/外壳:DO-214AC，SMA 供应商设备封装:DO-214AC（SMA） 包装:带卷 (TR)
SRV05-4ATCT
制造商:Semtech Corporation 功能描述:ESD Suppressor Diode Arrays 15KV 6-Pin SOT-23 T/R 制造商:Semtech Corporation 功能描述:TVS DIODE 5V 4CH BI SOT23-6 制造商:Semtech Corporation 功能描述:SRV05-4A Series 6 V 5 pF Uni-Directional TVS Diode Array - SOT-23-6L 制造商:SEMTECH 功能描述:LEAD FREE ESD PART
SRV05-4ATR
功能描述:TVS DIODE 5VWM 17.5VC SOT23 制造商:smc diode solutions 系列:- 包装:剪切带（CT） 零件状态:有效 类型:转向装置（轨至轨） 单向通道:- 双向通道:4 电压 - 反向关态（典型值）:5V（最大） 电压 - 击穿（最小值）:6V 电压 - 箝位（最大值）@ Ipp:17.5V 电流 - 峰值脉冲（10/1000μs）:5A（8/20μs） 功率 - 峰值脉冲:- 电源线路保护:是 应用:以太网 不同频率时的电容:3.2pF @ 1MHz 工作温度:-55°C ~ 125°C（TJ） 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商器件封装:SOT-23-6 标准包装:1